December 11, 2023
A topical concrete surface densifier/hardener is a liquid chemical compound (liquid silicate) that chemically reacts with the concrete surface to increase the hardness, reduce the concrete's permeability, and dustproof the concrete surface reducing surface powdering.
November 27, 2023
This article will explain the nuances of dust extractors, how they work, and everything you need to know before renting or purchasing a suitable unit for your dust-producing concrete preparation equipment.
November 6, 2023
ESD flooring is a type of floor covering that controls the electrical resistance of the floor and prevents electrostatic discharge (ESD).
October 23, 2023
Preparing a concrete floor to obtain the perfect surface profile is a crucial step when applying paint, or coating. For paints and coatings to adhere properly, the surface will need to be clean, roughened, and opened to allow the paint or coating to absorb into and develop a bond. When you open a floor, you remove the very top surface of the concrete substrate to uncover the concrete pore structure. This open pore structure provides a place for the paint or coating to absorb to develop a bond.
October 3, 2023
Concrete is a rigid material. When you try to bend or stretch it, it will break. Reinforcing steel is used in concrete to increase the tensile strength while enhancing the ability for it to bend without cracking. Concrete has great compressive strength. When under a compressive load you will not see it crush in a normal working scenario. Its hardness and high compressive strength are why it’s used on almost every construction project.
September 25, 2023
Concrete is the most widely used building material in the world. It is in almost every construction project, whether it be commercial, industrial, or residential. If the floor is on grade (dirt directly below it), the floor will be constructed of concrete. Once cured, you will have a usable floor. Now what can be done with this durable floor to enhance its visual appearance to fit within your design?
September 11, 2023
Over the past 30 years, polished concrete has become a widely used and specified flooring system in a multitude of environments. It started in the industrial segment of the industry supplying factories and warehousing a durable, modest maintenance floor system.
September 1, 2023
Densifiers, liquid hardeners, and silicates (all the same) are used to harden the concrete surface and fill microscopic voids that are produced while the concrete is developing its strength (hydration process). This material is liquid and spray-applied with a low-pressure pump sprayer to the concrete surface fully saturating the substrate.
August 25, 2023
Choosing the right surface preparation method is essential for getting the desired results. Typically, there are two prominent methods: shot blasting concrete vs diamond grinding. The choice will ultimately be determined by which method you prefer more and the results you are attempting to achieve.
August 11, 2023
Unlike conventional concrete coatings, UV- HS Plus cures immediately with exposure to ultraviolet light. As a portable light passes over the wet coating, a photo-initiator reacts with the UV light to instantly cure the film.