Trap Style PCD with Wear Bar

DT-TP-PCD

Trap back style double PCD with 18 grit bar. The PCD is an excellent choice when removing medium/heavy coatings. Available in left and right rotation options.

The design and positioning of the PCD with an aggressive diamond segment acting as a stabilizer and depth guide scrapes the thickest of coatings aggressively and follows with a conventional grind all in one pass.

The weight of the machine is partially supported by the diamond segment - this segment limits the PCD's penetration into the concrete and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. 

  • PCDs with a metal button or sacrificial bars are less aggressive and are designed for thin coating removal.
  • PCD’s without a metal button or sacrificial bars are very aggressive and designed for thick coating removal. They will leave a very coarse profile on the concrete. 
  • Important: PCD tools are direction specific. Always check the direction of rotation of the grinding heads.



Resources